Keurig K150 Clicking Won't Turn On

Keurig K150 Clicking Won’t Turn On (Problem Solved!)

Have you ever been all set for that much-needed caffeine fix, only to find your trusty Keurig K150 giving you the silent treatment? Instead of the familiar hum of brewing coffee, all you hear is a series of clicks, and the machine just won’t power up. Frustrating, right? We’re here to help. 

This guide delves into the Keurig K150 clicking issue troubleshooting and get your coffee flowing again.

Why Does Keurig K150 Clicking Won’t Turn On

The intriguing clicking sound you’re hearing from your Keurig K150 can be likened to a traffic jam on a busy highway. In this analogy, the machine’s internal water lines represent the highway and the water moving through them is the traffic. Over time and with frequent use, debris or mineral deposits can build up inside these lines, obstructing the smooth flow of water. 

Consequently, when you attempt to brew a cup of coffee, the machine struggles to push water through these congested channels, resulting in a distinctive clicking sound. It’s akin to your Keurig trying to honk its horn, signaling an issue, but finding itself stuck in this metaphorical traffic.

How to Fix Keurig K150 Clicking Issues

1. Power Source and Cord

Before proceeding with more complex solutions, it’s essential to eliminate the basic causes first. Your Keurig K150 might be having power supply issues. Check if it’s properly plugged into the power outlet. A loosely connected power cord or a tripped circuit breaker can disrupt its operation. Furthermore, carefully inspect the power cord for any visible signs of wear or damage. Frayed wires, cuts, or burns can potentially be the cause of the issue.

2. Reset the Brewer

Your Keurig K150, like many other electronic devices, can occasionally run into minor software glitches. A simple way to rectify these is by resetting the brewer. Unplug the coffee maker, allow it to rest and cool down for a few minutes, then plug it back in. This process provides a sort of mini reboot to the system, enabling it to recover from any temporary operational hiccups.

3. Descale the Machine

Over time, minerals from the water can build up inside your machine, potentially obstructing its functionality. This process is called scaling, and it can often lead to problems like unusual noises or even performance issues. To address this, you’ll need to descale your Keurig K150. This involves using a Keurig descaling solution or a mixture of vinegar and water to clean the interior of the machine. The descaling process helps to dissolve mineral deposits, ensuring that the water can flow freely through the machine, thus improving its performance.

4. Clean the Needles

The needles inside your Keurig K150 have a crucial role in brewing your coffee – they facilitate the water flow during the brewing process. However, they can become clogged with coffee grinds or mineral deposits, hindering their functionality. The cleaning process involves using a thin, flexible tool, such as a paperclip, to carefully dislodge any obstruction within these needles, effectively acting as a miniature plumber for your coffee machine.

5. The Water Reservoir

The water reservoir, while often overlooked, plays a vital role in the functioning of your Keurig K150. If it’s not correctly placed, the machine might not operate as expected. Therefore, remove the reservoir, inspect it for any debris or damage, clean it if necessary, and then reattach it securely. It’s comparable to ensuring that all passengers are properly seated and buckled in before a flight takes off.

6. The Thermal Fuse

If your Keurig K150 is still unresponsive after trying all the previous steps, the thermal fuse could be a potential problem. Acting as a safety switch for the machine, if the thermal fuse is open or damaged, it prevents the machine from powering on. Replacing or resetting a thermal fuse can be slightly challenging, but if you’re familiar with minor DIY tasks, it’s worth a try.

When All Else Fails: Contact Keurig Support

When all your troubleshooting attempts prove futile, it’s best to turn to the professionals. Keurig’s customer support team is equipped to diagnose and solve a wide range of machine-related issues. They’re essentially like the doctors for your coffee machine, prepared to accurately identify the problem and prescribe the most suitable solution.


So, there you have it! Your Keurig K150 might throw a tantrum now and then with those annoying clicking sounds, but with these troubleshooting steps, you’ll be back to brewing that perfect cup of coffee in no time. Remember, a little care goes a long way in ensuring the longevity of your coffee maker.

FAQs (Frequently Asked Questions)

Why does my Keurig K150 click but not turn on?

The clicking sound is usually a sign of debris in the flow lines. It’s like your machine’s way of telling you it needs a clean-up.

Can using tap water cause the clicking issue?

Yes, tap water can lead to mineral deposits and debris buildup in the flow lines. It’s always better to use filtered or distilled water.

How often should I clean my Keurig K150?

Regular cleaning is key. Think of it as brushing your teeth. You wouldn’t skip that, would you?

Is it necessary to replace the water filter?

Absolutely! The water filter is like the gatekeeper of your coffee taste. Replacing it as recommended ensures your coffee always tastes fresh and clean.

What should I do if the clicking issue persists after troubleshooting?

If the clicking issue still persists, it’s time to call in the experts. Keurig’s customer support is there to help you out.

Share Via
Ronald Miller

I've been using multimeters for over seven years now, and I've tinkered with almost every brand out there. You might even say I'm a bit of a multimeter expert, but let's not get too carried away with titles.

Leave a Comment